...10 Commercial, DL, C5, #5 , #6 , Monarch, Booklet, Lee (A7), Choukei 3 Gou, Choukei 4 Gou, custom. Tray 2: 525-sheet tray (standard) 16 lb. Bond ? 28 lb. Cover (60 ?122 gsm), coated, Phaser High ...
...10 N.m 89 lb in Connecting Rod Bearing Cap Bolts 25 N.m+30°+15° 18 lb ft+30°+15° Coolant Pump Retaining Bolts 10 N.m 89 lb in Coolant Temperature Sensor 20 N.m 15 lb ft Crankshaft ...
...alignment. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm). Apply a force of 22 lbs to timing belt between camshaft sprockets. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm) ...
alignment notch seats When the sprocket seats on the camshaft tighten the sprocket bolt finger tight Verify that all colored links are aligned with the appropriate marks on the camshaft and crankshaft
CALIBRATE LASER ALIGNMENT LB4 can you inform how i can calibrate laser level alignment lb 4 depends on which microprocessor it has inside
...LB-4 transmitter. Unfortuinately for you (but fortuinately for thoes of us that fix them) parts have long since been discontinued for thoes units. Your best bet would be to go to an industrial or ...
Question about Laser Alignment 3900 Lb-1,lb-2 Rechargeable Battery Pack Cells, Lb1, Lb2
Laser Alignment 3900 lb-2. I can hear the motor running but the head doesn't spin. How do I take it apart to check the belt. The unit is sealed with copious ammounts of RTV-11 self leveling silicone. ...
Question about Laser Alignment 3900 Lb-1,lb-2 Rechargeable Battery Pack Cells, Lb1, Lb2
...10-in 15 Amp Slide Compound Laser Miter Saw I bought a Kobalt 10-in 15 Amp Slide Compound Laser Miter Saw from Lowes. The saw comes with the laser aligned to the right side of the blade. The manual ...
...10 N·m (89 lb in). Tighten the chain tensioner bolts to 10 N·m (89 lb in). Tighten the oil nozzle bolt to 10 N·m (89 lb in). Timing chain tensioner guide bolt to 10 N·m (89 lb in). Timing chain bolts ...
Question about 2004 Grand Am
...10 kg?m/72 lb?ft) ?147 N?m (15 kg?m/108 lb?ft) ? 30° - 60° big ends 39 N?m(4.0 kg?m/29 lb?ft) ? 60° ?30 flywheel is dowled pined to crankshaft so it goes in correct position.so cant get that wrong ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions