Questions & Answers for: lamp light blinking sharp projector

lamp light is on and nothing will happen can't get the projector to turn on to reset the lamp counter. The red lkamp symbol was blinking then the projector turned off. How do I get it back on to reset

lamp light on what is wrong? if it's blinking green, nothing is wrong. it's just cooling. if it's blinking red and the lamp is off, the lamp door is open. My power/ stand by light is blinking red. The

lamp light flashes green (warm-up). 3-Lamp light goes solid green, but no picture. (However, if you look at the lens, you can barely make out the image, .) 4-Faint lens image goes away, and lamp light

...light still red it doesn't blink and the device doesn't work what's wrong? Reset the lamp timer. 1,Connect the power cord. 2,While simultaneously holding down "menu","enter" and "down" on the ...

lamp in my sharp XR30X projector, the power light is green and steady, the bulb light is green by blinks in the following sequence: 1 long, 14 short. Do you know what this means? Replace the new lamp,

...red. Eventually, projector shuts down with solid red power and lamp lights. No light ever emits from the projector and of course no image is displayed. Any ideas? clean all serface. clean power fan

..., and have done the reset procedure several times, holding down the prescribed buttons simultaneously, and still no fire up. Blue blinking light at lamp indicator. is the lamp cover on ...

...light indicates that the lamp cover is open. Try reseating the lamp and making sure everything closes up right. If the light is still blinking, it is most likely a problem with the projector itself ...

...lamp" light keeps blinking red. Does this The "lamp" light keeps blinking red. Does this mean that I need a new lamp? The lamp life becomes 0%, when used for approximately 4,000 hours with ...

...on, green power light, blinking green lamp light. After several minutes the lamp light will turn red and the power light blinks green and eventually turns to red as well. i have same issue please ...