...lamp button started to blink. Any idea how much I should be prepared to pay? If the red lamp light is blinking the lamp is probably shot. The pricing of the lamp varies from $200 and up plus ...
...button starts blinking green 1x/second. after a while starts blinking red 1x/second and red "lamp" indicator starts blinking once every 5 seconds. replaced lamp. still black screen and blinking light ...
Question about PT-50LC13 50" Rear Projection HDTV
...button & "lamp" indicator blinks Red power button light blinks 1x/second and the red "lamp" indicator blink once every 5 seconds. Screen remains black, bulb is about 2790 hours old. Any suggestions? ...
...doesen´t work. The lamp door is closed. The beamer has no power. I have pressed the red reset button inside the beamer. Nothing changed. What should I do? Have anybody an Idea? Thanks a
Question about Grand WEGA KDF-60XS955 60" Rear Projection HDTV
...the reset button on the remote Press the power button on the tv (The tv will turn itself off the back on) Now release the reset button It sounds like the lamp needs replaced. Please rate this a ...
Question about Grand WEGA KDF-60XS955 60" Rear Projection HDTV
...lamp light began to blink on power button and about 15 seconds later the set made the electronic sound it would usually make under working conditions (as if the set is trying to turn on, but no lamp ...
Question about Grand WEGA KDF-60XBR950 60" Rear Projection HDTV
lamp door 3xl. still blinking. After I unplug and then plug tv to reset I get a solid standby light,then when I push the power button I get a green light that blinks 6 times then it blinks red 6 times
Question about PT-50LC13 50" Rear Projection HDTV
...lamp housing is secure and so are all covers. From my research the power button will flash yellow when the covers are not secure. This is not my first time at replacing the lamp,...but now, after ...
Question about XL-5100 Projector Lamp for Grand WEGA SXRD KDS-R50XBR1, KDS-R60XBR1
...lamp is placed in tv, but tv won't come on. Light in front of power button is blinking green, then blinks red. Not sure what the problem is One question, why you decided to replace lamp in tv? Did tv ...
...seconds OFF): Lamp fails to light on NCE VT491. Wait about 10 minute or more and then turn on again. Just hold HELP button for 10-15 seconds and then press ON button to start up the video
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
