Question about bizhub C351 All-In-One Laser Printer
...transfer belt before installation. We have not installed a new transfer belt recently, so I do see how this could possibly be accurate. Can anyone help? C2152: Transfer belt separation it seems that ...
Konica Minolta C451 Bizhub I have a problem is the cod C2151 what to do Thanks http://www.copytechnet.com/forums/konica-minolta/9671-c203-253-353-error-code-c2152.html Read about belt problems here. c
...belt retraction failure. Its a common error that can be reset by opening and closing the front door with the machine on. Look in the trouble history and if has happened often, better order a new
Konica/Minolta about this code that covers models C203/C253/C353. Since it is not covered in the C350 manual I can only assume that if you have a C350 and have this code then it must be a problem with
Minolta Bizhub C351 Error code C-2152 • The 1st Image Transfer Retraction Position Sensoris not activated (retracted position) within 5sec. after the 1st Image Transfer Pressure/Retraction Motor has ...
Question about bizhub C351 All-In-One Laser Printer
konica minolta c252 error code c-2152 reset Remove the transfer belt and reseat it. who ever installed the transfer belt may have hit a sensor and did some damage to it. IF after reseating the ...
...transfer belt and roller (sponge looking roller on the right side door the transfer is across from it in the machine take it out re-seat both of the them., if not will need a tech open close front ...
Question about Konica Bizhub C353 Drum Cyan Imaging Unit
...transfer belt assymbly then error 2152 appeared Sir, Open close front door. to reset. Ensure belt was install properly the code is for that device also check the transfer roller sponge one. ensure ...
Question about Konica Bizhub C353 Drum Cyan Imaging Unit
...transfer belt unit its error 2152 Open close front door. to reset. Ensure belt was install properly the code is for that device also check the transfer roller sponge one. ensure shipping parts remove ...
Question about Konica Bizhub C353 Drum Cyan Imaging Unit
...Konica Minolta Biz-hub all the time when i swith on the machine this Error Code appear and the machine is not working any more Code: C2152 Code C2152 Description Transfer belt pressure welding ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions