Questions & Answers for: kodak printer prints line

Kodak AIO printer will print a test page, it will copy but itt will not print from the computer itself. The printer is going back and forth like it is printing but sometimes I get a totally blank page

...prints with lines 5300 kodak will not print red and prints with lines You will either need to replace a cartrige, or replace the printhead. To get a new printhead, cal 1.800.421.6699. Also try ...

Lines on print Kodak G600 prints with a defused line down the one side of the print on all my prints check your paper guide and then run through it's maintenance test. then run another test paper.

Kodak 5100 All In One Printer. The print quality is fantastic. The printer features are very good. There is a problem, lines through the prints in my case indicated a failed print head. Kodak has been

...printer details and will send it to kodak and you will receive email response on your email for the replacement print head being shipped to you.........this was just in case you dont want to call ...

...recommends its customers to use the printer atleast once a week,Kodak researchers have fixed the issues with printheads,the printheads do not go bad nowadays.Relax ,all the best for future

kodak esp 3 printer will print but has lines through letterring o my kodak esp 3 printer will print but has lines through lettering and photos. i thought it may be ink defect. so i went and got ...

...Kodak 5300 printer there are lines all through them. I have cleaned the print head two times, one after another and the lines are still there. What will remove the lines? If they are white lines keep ...

...Kodak printer, the ink can dry inside the heads and they stop printing or start missing lines that cannot be fixed by using the kodak cleaning cycle. . I have had this happen to two of my Kodaks. To ...

Kodak 5500 AiO Printer started missing lines of text in finished prints Prints everything OK but has started missing random lines or portions of lines in the final printing. There is no problem when ...