valve but dont see any leaks also kinda knocks just like something is loose inside engine wonder if this could be problem the knocking is probly the barings in the bottem end but the oil leek could be
Question about 1995 Wrangler
engine knocks at idle or low rpm, no load, no smoking or oil loss oil pressure stays consistant, sound like it could be a idler arm? rocker? just started after the jeep was being used more on the ...
My jeep wrangler just passed 100,000 miles, what service does it need? Here is the basic maintenance list for your Jeep: ~ Inspect lights and check tire pressure at least monthly or before & after
...knocking noise. removed valve cover and all the valves seem to be working right. at rapid speed you can't hear the noise until it goes back to idle then it comes back. If a knocking sound occurs at ...
...valve lifter or rocker arm that has worn. Those cause tapping noise, not knocking. Knocking is usually caused by a worn rod or main engine bearing. When either wear, oil pressure gets lower (why I ...
...valve spring.RAPPING OR DEEP KNOCKING ENGINE SOUNDUsually bad news. A deep rapping noise from the engine is usually "rod knock," a condition brought on by extreme bearing wear or damage. If the rod ...
as simple as tappits on rocker arms. valves pinging..........IF it is a ticking and not a KNOCKING noise then i would have another mechanic take a look at it...Sad thing that happens is some
1990 jeep wrangler runs rich won't stay running replaced map and temp sensor which engine, 2.5L , 4L, or? no scan tool for 93 is CEL lamp glowing running. lots of things can cause rich, we do tests to
Question about 1989 Wrangler
just replaced rod and main bearings in a 1989 jeep wrangler and it runs great at an idle but when you give it gas there is still a knock i put 10/30 oil in it but dont understand why it still knocks ...
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions