Questions & Answers for: knob dishwasher hard turn

...dishwasher has a mechanical timer knob that you turn to get the dishwasher started, I would suspect that it is failing (not advancing after a certain point.) Please report back with what you find,

Ad

has a mechanical timer behind the main knob, that mechanism is often the failed part. If the dish washer is has a separate power on/off button, your problem is probably else ware inside the dishwasher

Ad

...knob is there anything that can be done Look very closely at the wash motor shaft extension on your dishwasher. You?ll need to disassemble from the spray arm downward to get to it. A plastic shaft ...

Question about Dishwasher

1 Answer

knob is turned. The short cycle will engage (sound like it is working) but the soap is left in the reservoir and about 2 inches of water is left in the bottom. Thank you for your help. Sounds like the

Question about Dishwasher

1 Answer

...dishwasher , quite old but hardly ever used on moving house and fitting machine found that the machine wont work , lights up OK. but when turned on sounds as though its working, but then stops and ...

Question about D5152XXLS Dishwasher

1 Answer

...knob to select the program goes round much too fast. So a full program takes about two minutes, which obviously is not sufficient. Does anyone know what this could relate to? It seems all functions ...

Question about D5152XXLS Dishwasher

1 Answer

dishwasher won't stop running After finishing cycle, it starts running again by itself. Model #MDB7100AWQ The controls have failed. The knob that you turn or the button that you push. They are not ...

dishwasher (model # dwu491oaax - not sure if the 4th lettr from end is a "zero" or letter). It has never been a problem before, but hadn't been used in awhile. The light in the front

Question about DFUD042 Built-in Dishwasher

1 Answer

...knob the opposite direction than what the arm rotates. there might be a blockage in the shaft which can be seen when the spray arm is removed. the other blockage might be in the inlet to the pump ...

Question about DFUD042 Built-in Dishwasher

1 Answer

...dishwasher, it will not run, could it be the dial control? Whirlpool 280-0 This is hard to diagnose without tools. The first thing to do is check the breaker for it. See if it has tripped. If it has ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...