Question about 1997 Sephia
Gear problem with Kia MENTOR (I couldnt select this option sorry) The clutch mastor cylinder had a leak and has been replaced. However, car will still nto go into most gears and thinking maybe gear ...
gear as well which would acount for the stalling and the grinding,whitch in turn has not done the gearbox any good at all. the starter could be turning over a lot of broken metal. So get it checked by
kia sedona wont go into any gear you can adjust the clutch on the clutch pedal by undoing a nut. either wind it in or out til it selects gears properly. otherwise its the 2 linkage wires that run from
...gear I have a 2008 KIA K2900, the car won't go into 1st, 3rd and 5th gear, has anyone encountered this problem before? . If the box has been performing as expected and this has just started ( manual ...
...gear!! My 2003 Manual 2.9CRDi Kia sedona will not go into any gear was driving along went for fifth got nothing pulled over and it will not go into any gear the gearknob oves as if selected but the ...
Question about 2002 Rio
...kia rio and my check engine light came on the dianost said the problem was 4th gear incorrect ratio! What does that mean? What does it mean 4th gear incorrect ratio? The purpose of the automatic ...
Question about 2002 Rio
...Kia rio is not going into reverse gear.When I switch off and restart it would work. Kia rio 2012 model Sounds as if you maybe having a problem with the transmission range switch.The switch is mounted ...
Question about 2002 Rio
...Kia Van 2003 won't stay un drive every two blocks slips to Nut. if this is a manual transmission( details not provided) then check for transmission mounting bolts are tight, extension housing bush is ...
Question about 2002 Rio
...kia sorento im able to put into gear (maunal trans ) but 5he car goes no were is the clutch ajustable Sunds like its burned out best way too check clutch ,is to select third gear and try too drive ...
Question about 2002 Rio
2016 KIA RIO GEAR ONE IS HARD TO SELECT AND 6TH GEAR DOES NOT WORK AT ALL WHAT IS THE EXACT PROBLEM? Selector is possibly worn or out of adjustment. Low/no oil in the gear box ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions