Questions & Answers for: InFocus keystone

...No light projects so I cannot see menu. Try resetting the projector by pressing and hold the two Keystone buttons, then turn ON projector. Hold down the two Keystone buttons for 15 seconds, then ...

...The projector comes on but the lens doesnt open Try doing a manual reset by depressing the two Keystone buttons and turn power on. Hold down the two keystone buttons for 15 seconds, then release ...

...it used to work ok. but now lens is not opening and there no picture. Press and hold the two Keystone buttons on the top of the projector. Turn the projector ON and continue to hold down the ...

what's wrong with my projector that makes the picture crooked? the keystoning feature may be on. if so, you can adjust that in the settings menu. if it's cropped, the tunnel may be collapsing or there

why is the screen higher on one side more than the other You might have digital shift or keystone Mis adjusted. Please go into the picture settings and look for digital shift or the light and make ...

...when projected onto the screen. How do we square it up? if it looks like a trapezoid, you need to keystone it. you can either use the keystone buttons on the top panel or go into the menu under the ...

...and a red blinking light. no output from projector reset the lamp hrs. do this by holding in the 2 keystone buttons then switching the unit on. keep the buttons pushed in for 30 seconds. if this ...

...square on screen right side considerably higer than left _ can't get it squared Have you tried the keystone correction. You must have the projector squared/lineup to the area you are

...screen there is a message to replace bulb how do i clear this out ? if I remember right, hold the 2 keystone buttons in and while you are holding them in, switch the projector on and continue holding ...

...be a setting on your projector that will compensate for this problem. Usually it will be called keystone adjustment or something like