Questions & Answers for: GMC key wont turn in ignition

put in park , turn off key & key wont come out of ignition. Does the transmission work in all 4 gears? I've seen bad ignition switches cause this. Not the ignition lock cylinder, the electrical switch

...steering wheel, but the key wont turn. it takes about 10 mins of fiddling for the key to eventually turn. whats the problem? you will need the tumbler replaced. It will not work one day soon at at ...

...key, sometimes the wheel put preasure on lock and wont turn but if preasure is removed it turns, if that doesnt work try another key. hope this is helpful. Either replace lock cylinder also if won't ...

...wont turn with original key place key in ignition and tap it with a malat do not remove between hits just wack and try and turn and yes have paitence if no key drill ignition tron center use a 1/2 ...

...wont turn. my key will not turn or come out of ignition,it feels lik its locked.also my column shifter wil not move did you try wigglin the wheel to get your key out sounds like you need a new ...

wont ether way Two causes for this: (1) steering wheel needs to be turned, then try key again. (2) faulty ignition switch in need of replacement (including a new set of keys). When starting a car, the

2000 gmc yukon xl 1500/key wont turn ignition kwy wont turn could be that key switch has went bad or key is worn

key to on position, let sit for 15 min and still wont start just turns over Find fuel test valve in fuel rail on top of engine. Take cap off valve. Turn key on. Push down valve with screw driver. fuel

...wont start turn key and everything works but wont start i play with the key and i hearthe gas pump i try to sterted manuely and it start but turn off the light stays on with the ignition of they tell ...

...key wont come out of the ignition? Key FoB wont work either, used manual key to gain entry and now key wont come out of the ignition? It has to have power to remove the key. Jump it with another ...