no key 2000 gmc k 2500 No key how to replace cylinder wih NO KEY !!! If you just need a key the dealer could make you one with the serial number and proof of ownership. If not you have to drill out ...
1988 GMC jimmy ignition switch Key will turn to the acc'y position then hangs up making it not turn to eng. crank pos. Need a new lock and tumbler.
...key tumbler , read instructions with new part Update: I solved the problem. If i beat on it with my hairbrush, it will "pop" loose. My boyfriend finally came into town and switched keys with me, his ...
...key resistance value, this is preformed by the dealer only. You dont need to program the body computer if you follow this procedure... Replace the ignition tumbler and reconnect all cables. New ...
...someone tried to steal it at one point and jammed a screwdriver into the cylinder. The key still goes in the cylinder, but it does not turn it. All directions I have found tell me to
key wont come out of ignition Sounds like you may have a bad ignition lock which will need to be replaced. If you manage to get the key out this will happen again and I've been there and it will drive
when i turn off my vechile the key gets stuck in ignition and will not turn off all the way sometimes and battery light stays on what is my problem You need a new ignition. The tumblers are off and ...
2000 jimmy ignition wont turn cant turn the key your tumblers are worn or damaged, some people don't realize if you have to many things on your key chain the weight can cause damage to the ...
MY KEY WONT TURN bent tumbler inside the ignition lock cylinder.. Replace the cylinder is all you can do to fix this. I have seen 100's of cases such as yours in the past decade with this problem
...wheel and ignition are locked up. i cannot get it to turn over or anything. when i try to turn the key forward or backward it does nothing. i dont really know anything about cars and cannot figure
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions