Questions & Answers for: Cadillac DeVille key tumbler

tumbler is smooth all the way around it. Pull the key out of the cylinder and you will see what I mean. The brass bars will come out.If all the brass bars are not flush the tumbler won't turn. Will go

Ad

off, i tried getting new keys, i dont know what else to do. please help its not the key, its the thing the key goes in thats the problem The ignition tumbler. It usually breaks a connection internally

Ad

don't have a key with the diode in it thats right for the car. with the old key in the old tumbler with the new wire and contaacts all assembled the car should reconize the key and run like it used to

we can not get the key out of the iginition Some times these keys stick due to the resistor anti theft module built into the key and sometimes they stick because the key lock will not turn far enough ...

04 cadillac deville key will not go in the ignition Wiggle the steering wheel back and forth and try to make sure the key cylinder is in the off position. Sometimes the key will come out with the key ...

Question about 2002 Deville

2 Answers

Can't put key into ignition Hello: It sounds like the tumblers came loose in the ignition lock cylinder. You will need to replace the lock cylinder and possibly the key to. A worn key is hard on ...

2004 caddy wrong keys we put in part way and pulled out and now orginal keys won't go in the ingition. 2004 caddy wrong keys we put in part way and pulled out and now orginal keys won't go

...key tumbler assy. wires (small like speaker wires) breaks off key tumbler which will cause security light to flash or stay on. tilt whell up or down, sometimes vehicle wires to tumbler will touch ...

...key it might be because the tumbler has been turned past the point of key release it happens a lot with worn ignition tumblers try turning the ignition tumbler forward as if to attempt to start it ...

board compressed air and see if you can blow anything out. Also put a little graphite on your key and see if that will allow it to enter. Make sure that the ignition tumbler is in the correct position

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...