Questions & Answers for: Dodge key lock

...key to lock or unlock my car but the key will not turn too. Basically, everything is locked. tried turning the steering wheel left & right when turning the key. Please help!!!! Are you using the ...

Ad

...key lock. From the description the key lock works intermetiatly. After you put the spray in work the key in and out a few times and work at turning the lock. While your trying to turn the key try ...

Ad

...here is the tumblers they call them inside the lock cylinder have drop locking the key in..You will need to eventually need to replace lock cylinder and key.I'm here if you have anymore

...lock: Put the key in the ignition. With left hand, put turning pressure on the key. With right hand, tap the key lightly inward with a hammer. I thought it was nuts. It worked like a charm. Hello, I ...

...Remove the spring clip from the door lock assy. and remove the lock. The door and ignition lock use the same key. Take the door lock to a locksmith and they will make a key for you. Hope this

Question about 2000 Caravan

1 Answer

...key lock 2000dodge caravan Ignition Lock Cylinder - Removal & Installation CAUTION The Supplemental Inflatable Restraint (SIR) system must be disarmed before working around the air bag or SIR ...

Question about 2002 Durango

1 Answer

...lock as the key has to be in a certain position to release the lock cylinder from its housing. The safest, but by no way the cheapest way out is to to get a lock smith to replace the lock for you. ...

...lock on the Key-in-switch and Halo Light four terminal connector. Remove connector from switch Remove key cylinder from switch as follows: With key inserted and ign switch in the LOCK position use ...

Question about 2012 Charger SRT8 Sedan 6.4L V8 5-speed Automatic

1 Answer

2012 Dodge Charger. Key fob not locking and unlocking doors? I have a 2012 Dodge Charger replaced the battery in the key fob today the car starts but the key fob is not locking or unlocking the doors ...

...lock that the key goes into) from the lock cylinder. Now that the tumbler is removed, you can insert the new lock cylinder into the ignition switch. Reinstall the lock cylinder retainer and the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...