Questions & Answers for: Chevrolet key lock

Question about 2005 Blazer

1 Answer

...door locks unlocked, locked and also did this a number of times. Suggestions? Sounds to me like the key FOB was swinging on the key change and hitting the column. What you are describling is the door ...

Ad

...key in the lock cylinder) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder) 7. Insert the ignition key into the ...

Ad

Question about 2001 Silverado 1500

1 Answer

...key into lock while turning it is the tip [pointy end] of the key that releases the switch tumbler lock allowing it to turn. keys & switches wear out, a 'heavy' key ring especially wears the ...

lock cylinder to release the key. The graphite powder comes in a tube and is used to lubricate locks. Shoot the graphite into the lock clyinder by squeezing the tube repeatedly. Then work the ignition

...lock on your key pad. If the system fails to lock your rear doors you will need to get the vehicle to an auto electrician to check out the issue and rectify it for you. There are a number of possible ...

Question about 2005 Silverado

2 Answers

...key lock Solenoid on the coloum the issue The ignition lock cylinder is worn out. after so much use, the brass key and tublers inside the lock wears due to filings that build up inside of the lock. ...

...lightly into key tumbler. tap lighly on end of key with hammer while turning key. if key turns, do not put key in lock position until someone replaces key tumbler. cheaper to repair if key is ...

...lock your key in the cylinder. If it were me I would call a lock smith that can make keys from you lock cylinder as I would think your key may be worn down as keys do from time to time. Remember that ...

Question about 2003 TrailBlazer

1 Answer

key, I can lock the driver's door, but none of the other doors lock when I lock that one with the key. Do I need to buy another fob? I thought that when I locked the drivers door with the key that the

...key in the lock cylinder.) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 7. Insert the ignition key into the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...