Questions & Answers for: where is the key hole

Question about 1997 Jimmy

2 Answers

...hole turn key back its a bad ignition switch or harness to the switch. there is a hole right under the key in the plastic. gm put a rubber plug in the hole. it use to be the hole were the key release ...

Ad

put the key in, insert the screw driver into that hole and the lock should pull out. You may need to turn the key as you are pushing in the hole to depress the pin, you should feel it go in about 1/8"

Ad

Question about 2002 Sunfire

1 Answer

...the the key lock up and down put your finger in the key hole and with the coat hanger play around near the key hole ,you will feel the key hole moving well up and down ok untill you hook it pull on ...

...key. If the hole isn't there, carefully cut or drill the plastic out there, and push the solenoid there. I believe they quit putting the hole there in 03', BUT like mine, you'll see a ...

Question about 2037 Mechanical Sewing Machine

1 Answer

...key hole round or flat? If it is round, use a flashlight and look into the hole. It could be a triangle shaped hole, a square hole, or the male opposite of either. For a hole, find a small screw ...

...key. If the hole isn't there, carefully cut or drill the plastic out there, and push the solenoid there. I believe they quit putting the hole there in 03', BUT like mine, you'll see a ...

Question about 2004 Envoy

1 Answer

...key. If the hole isn't there, carefully cut or drill the plastic out there, and push the solenoid there. I believe they quit putting the hole there in 03', BUT like mine, you'll see a ...

...key will not go into ignition switch check there is no obstructions in key hole. its not uncommon to put fluff in the key hole from removing key from your pocket over time it will block the key

...key, you MAY be a hole there with chrome colored push pin. Push this pin up and remove your key. IF your cover doesn't have the hole, it will have a stamped hole where the hole should of been. Use a ...

...key hole . There is one for the trunk . Was that factory or someone removed it an filled it over ? Have to see to figure out. It should have key hole as well. Good luck Mai It should have a key hole ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...