Questions & Answers for: Oldsmobile key chime fuse

Question about 1999 Alero

1 Answer

...key to On Position. (Do not turn car on. Open driver side and open the Fuse Panel. 1.You will see RED RESET button hit it twice. (The Check Tire Pressure Light will flash.)Now 2.Now, press and hold ...

Ad

...key in the ignition lock cylinder. The ignition must remain in the LOCK position for the rest of the procedure. 7. Release the door lock switch. You will hear three chimes. This chime feedback ...

Ad

...key on. wait for chime to stop. when chime stops, fully depress and release gas pedal 3 times quickly. start engine. light should be out. if not, repeat. There is an reset switch in the fuse panel on ...

Question about 1994 Cutlass Supreme

1 Answer

...CHIME WHEN KEY IS IN. PUT OLD RADIO BACK IN AND STILL HAVE NO POWER TO LIGHTS,IGNITION GAUGES,WINDOWS NOTHING BUT DOOR CHIME. THIS IS MY ONLY CAR WOULD GREATLY APPRECIATE ANY HELP THANKS Sounds like ...

Question about 1998 Intrigue

1 Answer

...key in ignition. Do Not turn ignition. 6. Release door lock switch on drivers door panel. A Chime will sound 3 times indicating that you are in programming mode.7. Press both the Lock and Unlock ...

1998 old 88 wont start key chimes when key in ignition , interior lights come on , headlights come on but dash will not lite up , nor will radio when i turn the key to start , no click , no turn over

...chime is on without key in ignition(frequency changes when it is in) and no parking lights. I noticed a while ago that the dash lights would flicker when they came on but now they don't at all. Also ...

...the fuse still intact I put it back in now my car chimes 8 times when i put key in Check for the heater relay. It's an industrial type "fuse". Check the heater relay. It has an industrial type

...chime that will confirm successful programming. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds. Repeat the previous step on each additional transmitter to be ...

Question about 2000 Bravada

1 Answer

...Key-In Warning Chime Voltage is supplied at all times to the BCM through the following components: • The Underhood Fuse Block TBC fuse • CKT 1140 (ORN) The chime sounds if all of the following ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...