Cinego D-1000 red light flashing When you suggest placing a fan on the left side of the projector to prevent over heating, do you mean placing the fan on the left side of the projector looked at from ...
no power what is the number for protection diode on back of circuit board? It it blowing fuses?
...how can I fix it? if it is overheating, blow out the projector with canned air. excessive dust keeps in the heat that the projector is trying to expell. also, make sure all of the fans are ...
Question about Cinego D-1000 Multimedia Projector
...keeps blowing fuses My father powered this unit on without the mic or antenna hooked up....now it keeps blowing fuses! Help! It may have been reversed polarity on turn on. This can short out the ...
blowing fuses, please help thanks... This radio has been hooked up backwards. CB radios cannot be hooked up backwards or it will destroy it. However this is hope. Because they can be damaged this way,
keeps burning up fuses and there is a metalic smell too. Got any idea whats wrong with it or what I did to it? It was a great radio and I paid alot for it(for me). That radio needs a MIN.4 A. Fuse. If
447 will not take power from power suply If you have an inline fuse make sure to check and replace it if needed. If the radio was hooked up backwards then you need to go to radio shack and pick up a &
Radio Shack Realistic pro 2020 scanner worked perfect, then a power surge on our street, into our house, then it would not work, so I assume their is a protection built into the scanner to blow a fuse
inline fuse blows when mic is keyed and talking either wrong size fuse or wires are touching inside mike when keyed
...keeps blowing fuses. This has worked for a year with no problem and one day, while in regular use, blew a fuse. The fuse has been replaced but continued to blow when the power is turned on. The ...
Usually answered in minutes!