my zxr750 L1 wont started i have a zxr 750L1 1993 it started fine but after giving it a service new oil filters and battary it wont start and it keeps back fireing can any one help thanks joe Did you ...
...bike as it's now starting to **** me off did you pull the pistons completely out of the caliperand clean the inside of the caliper?If not,do so.also,clean the master cylinder and or the brake ...
how to re-shim zxr750 j1 take the valve cover off make sure the the cylinder that you are workin on is at top dead center compressionor the nose of the cam facing up.. you will have to get the shim ...
kawasaki gt750 trike conversion have recently bought her she seems to be fireing on only 3 cylinders doesnt like to idle in 1st gear feel the exhaust at start up or pull the plugs and figure out which
...cylinder. If the slave is leaky then the clutch would gradually engage with the lever pulled or not disengage fully. If the slave is sticking, then you would be scrubbing gears since the ...
working like three cylinder until 4000 rpm Check your ht leads are right to the correct plugs. I once changed plugs, took ALL leads off at same tiime forgetting which went to which plug. Got 3 and 4 ...
Question about 1989 ZXR 750
kawasaki ZXR 750 H1, clutch lever goes hard and then cluch starts slipping. If I allow air in to the master cylinder on the motor the clutch would be finr for a few day and slowly start hardening. ...
zx7 running weird tach flicking up and down Hello, I am having a problem with my 1991 zx7. Randomly as I'm riding down the road say about 6000 rpms the bike will start sputtering and backfiring ...
What is the firing order for zxr 750 91 model 1,2,4,3 with 1 being the cylinder on the left side of the engine as you are sitting on the bike.
Usually answered in minutes!
108 Questions
31 Questions
23 Questions
18 Questions
14 Questions