Question about Jura Capresso Coffee Makers & Espresso Machines
coffee machine My new coffee machine is not dispensing coffee but grinding beans and putting them in the used grounds container and the hot water is going into the drip tray. take out the mecanism and
Question about Impressa Z5 Espresso/Coffee Maker
...Jura coffee makers have the same sensor setup. Over time, coffee grounds will spill out into the tray/water and for a slurry that will maintain contact between the two metal tabs at the rear of the ...
Question about Impressa S9 Coffee Maker/Espresso Machine
...Jura Capresso Impressa S9 and it keeps saying empty tray try this:clean with brus two metal contact on drip tray Where the contacts attach to the drip tray on the inside is where I had some coffee ...
Question about Impressa E8 Espresso/Coffee Maker
Jura E8 in order for the "missing drawer" light to go off. I've unplugged the unit to allow chip to reset... nothing. I think the elevator is stuck thus causing the drawer to not go in place
the plastic space between them. Then using compressed air clean where the contacts enter the machine in the rear. Usually there is moisture back there and the machine assumes the tray is full of water
Question about Impressa E8 Espresso/Coffee Maker
Jura Capressa -Tray will not go in, looks like something from above protruding down in the back so that the tray sticks out 1/2 inch (so machine does not work) I had the same issue. Had to send mine ...
tray and can't get it back in There are metal connectors at the back, using a dry towel wipe then clean. If you still get the error, than the connectors those connectors connect to have water.
Question about ENA 9 One-Touch Espresso Machine
...coffee machine SOLUTION: Do not open your Jura machine. Try this first: Try pulling out the tray. Then let it dry out for a day or two. Then when starting it up, while the mechanism is running, try ...
Question about Impressa S9 Coffee Maker/Espresso Machine
...Jura. 2- There is accumulation of Calcium in the hydraulic system, generating back pressure. This reduces the pump pressure and water cannot force its way through coffee grounds. 3- Stop using filter ...
Question about Impressa S9 Coffee Maker/Espresso Machine
...Jura s8 coffee machine The drip tray is stuck 3/4 inside the machine, it won't come out or go back in. It may have been inserted incorrectly. How can we reset the machine so that we can remove the ...
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions