Questions & Answers for: EliteGroup jumpers

Forgotten CMOS password I bought this computer from a rent-to-own company and someone put a CMOS password on it. I called them and no one seems to know it. I know on the old 486s it was just a matter ...

...me a frontpanel for headphones, but when i want to connect them i have a problem with the internal jumpers on the motherboard. When i remove the jumpers to connect front panel, i don't have any

...pins.if that doesnt work put the jumper on mas or (master).if you have 2 hardrives make sure the jumpers are on mas and the second drive on slave.hope this helps.let me know.cs means cable select ...

a friend install my mother computer. how to jumper k7sem rev 3.0 motherboard.he put password on bios need to change boot order. to bot from new dvd rom i installed. cannot accees bios because password

...on the board, any help would be welcome,, thanks. This option should not need to be enabled through jumpers, the bios should automatically detect the ram type on the motherboard, make sure you are ...

ECS P4IBMS Motherboard CPU Voltage Jumper Settings There are five cpu voltage jumpers on my ECS P4IBMS motherboard (VID0-VID4). I'm upgrading from a 1.75 V cpu to a 1.525 V cpu and am trying to find ...

i do not set FSB 533,change jumpers JP1A1 and JP1B1 is not effect 1.Do you have the jumper for JP1A1 on pins 2 and 3? 2.Do you have the jumper for JP1B1 on pins 1 and 2? On that 6 pin jumper block, ...

where the jumpers are put on in the same where the jumpers are put on in the same mother board I went to the ECS website and under socket 478 for your board I was able to bring up yhe manual. You will

jumpers on ECS L4VXA2-BIGEST PICTURE I ask for jumpers on ecs L4VXA2 where nowone jumper and to let me see them on a picture a biges one [email protected] go to web site of board download them jim

need image of jumper settings for l7s7a2 rev 1.1 motherboard Elitegroup Computer Systems (ECS) Support > ECS L7S7A2 > Main Support ...