Questions & Answers for: what is a jumper plug Music

...jumper plug. You MIGHT be able to bend the contact to get moore force as a repair. If it is a mono 1/4 jack, then use a short jumper from the FX send to the return is another non-invasive fix.. IF it ...

plug sit a certain way. Someone ended up bumping it and it is not turning on now. What part do I need to fix it? Probably the jack is still OK but broken from the circuit board. If it is OK, one needs

...jumper cable to connect the preamp out to the PA in to bypass the failing contacts. On an insert jack, you can just wire a TRS plug tip to ring and plug it in. By pass the signal from C66 upper lead ...

change ring tones on wireless ringer SL-6166-RX-A Door Chime The chimes have jumper plugs to select the preset songs. You CANNOT load your own like cell phones allow. For tune settings your ...

...the board (those are even more fragile) see if you can't use the Radio Shack type anyway with short jumper wires to the circuit board. If you would rather use a board mounted one, they are available ...

...its losing power when in use. any ideas? thanks. Dave. S corrosion at the effects return jack. either jumper the jack to the effects send or spray it and work a plug in and out..or replace the ...

I have a behringer pmp3000 powered mixer and have had the output B to go out on it and we have not had it for 3 wks yet. previously we had a pmh3000 and have the same issue 3 times and decided to ...

Hello. I have a Boss MT-2 distortion pedal. It will not power up with the adapter or battery. Wondering what could be wrong. Any suggestions on what to look for? Thank you! The battery is connected ...

...jumper to the second channel. I'm having the same problem. I can hear my guitar when plugged into the left channel (#1). But, when I plug into channel 2with the same setting,  there's no ...

master knob. I would test by first trying a different guitar cord. If the fault is still there, try jumpering the effects in and out jacks with a patch cord. If there is sound now, clean the two jacks