Questions & Answers for: what is the use jumper panel

panel, take off the jumper caps and connect the front panel cable. Remember, if you connect the front panel audio cable, you won't be able to use the back panel. If you are going to use the back panel

...panel connections (which I do not) then there should be a jumper cap on pins 5-6 and 9-10. Unfortunately those jumper caps weren't present. I thought this might be the cause of my problems. So I ...

...jumper. Once you enabled the front panel the rear will no longer function. All Asus MB's work this way. You can't have both working at the same time, rear & front. Feel free to call Asus tech for ...

panel 1 jumper config i've lost my manual and need the panel i jumper config please many thanks Matt ...

...jumper can be accessed through an access panel. The graphic shows the location on the motherboard and gives the number stamped on the board, You will have to take the access panels off and search for ...

...pins Do not move any jumper pins when CPU is on,because it can damage the desktop or other components. The front panel audio jumper block/connector is J8A1 and BIOS configuration jumper block is

1. Remove the front panel audio cable. 2. Install a jumper on pins 5-6 (rear R channel). 3. Install a jumper on pins 9-10 (rear L channel). 4. Install a jumper on pins 1-2 (mic). 5. Replace the cover

...Panel Connector) http://support.gateway.com/s/MOTHERBD/FIC/105554/105554mvr4.shtml For additional questions please post in a Comment. Regards, joecoolvette There is a 4-Pin Speaker connector that is ...

jumper (1x1:3) is next to the CMOS battery east and slightly south of center, Freq MHz jumpers (4 x1:2) are on the north side just west of the DIMM banks, front panel etc. jumpers (multiblock + 2x1:2)

...jumper cap on those pins, your Front Panel audio ports, and Rear panel audio ports will not work. (JL1 = Front Panel JR1 = Rear panel. The rear panel is also the I/O area. Input/Output. Where the ...