Questions & Answers for: juki bobbin jammed

There was a small thread jam and now the top thread will not pick up the bobbin thread Try a new needle. If that doesn't do it, then the timing is off. You might need a repair shop to fix it.

juki ddl 8300n Help. Machine seems to be jammed up & won't move more than 1/8". After careful examination I see the 'Bobbin Case Positioning Finger' is keeping the 'Bobbin Assembly' from moving (an ...

juki dnu-1541 S hard to turn It is very hard to turn the wheel. I have lubed everything. What else could it be. The machine sews but after a short period the thread gets caught up under the needle. ...

...juki hzl-9800 Loosen the needle, try to remove the presser foot. Then try to remove the bobbin case from the machine. Otherwise, if it is jammed with a wad of thread, you can try using very small ...

...Juki 8700A has jammed, code E007,wheel won't turn it is locked cannot see any thread around bobbin holder? Search for: Make Model error code Try removing the needles and see if that frees the

Juki Frou Frou HZL-11 Sewing machine Cotton caught in the machine under the bobbin Try removing the needle and the presser foot from the machine. If there are threads above the needleplate, gently try

...Juki DDL 8700 without any fabric to test and the threads got sucked in and now the needle is jammed, when I turn the hand wheel it won't move the needle. I looked below and there was thread stuck in ...

...me. The broken needle may be jammed in the hook or race and/or the hook or race may be damaged. Remove the bobbin and the hook. See video on removing hook on a ...

...Juki HZL-F600 Quilt & Pro Special, it indicates there may be an issue with the machine's threading, bobbin, or pressure foot. Here are some steps you can take to troubleshoot and resolve the ...

Juki DDL 9000C-FMS Error Code 007 Overload of Motor? I received Error 007. I have checked the feed dogs; the bobbin; clean out any threads and such; used canned compressed air to clear an debris that ...