Questions & Answers for: jenn air spark module

spark module will not stop after lighting burner This is a Viking gas cook top professional series. Replaced spark module, now 2 out of 4 burners work. Spark module keeps igniting after gas is lit. ...

...Jenn-Air jgs8860bdp igniters continuously clicking until unit is unplugged. Causes? The problem that you're describing is commonly associated with the spark modulator. It usually occurs after a spill ...

...Jenn-Air 36" gas cooktop w. 5 burners, black. Mdl JGC8536ADB. Plastic knobs keep splitting, even if we remember to push down before turning. Have replaced two sets and now we're down to two working ...

Jenn-Air JGC8430 Gas Cooktop...all cook top burners continually spark when any is turned on. All burners will light and stay lit but sparking continues on all burners no matter which one(s) are turned

Jenn air downdraft cooktop. We had a new Jenn Air Jenn air downdraft cooktop. We had a new Jenn Air installed but, when turn the knob on one burner, the igniters come on all burners and won't go off? ...

...Spark module part no 7 at parts diagram it may be wet and by using a hair dryer or leave it unplug for some days can dry out and stop. If not then the electric contacts are stuck and need a new spark ...

...Jenn air gas cooktop ignitors (all of them) do not click and spark, the model is CVGX2423B. I suspect it might be spark module fails, is that right? It sounds like you need a new spark module which ...

How do I replace the spark module on the jenn air JGD8130ADB cook top? It is beside the thermocoupler , Buy new one . Remove old one . Install new one .

Jenn-Air CG206B. All ignitors don't spark or click. How would I know if it is the Spark Module or the Spark Ignition Switch. And cost if possible for parts and labor. Thank you. one thing to be sure ...

...Jenn-Air STOVE JGS8860BDP18, I need to replace the 4 burner Spark Module. Where is it located and how do I get to it?? It could be under the top or in the back. Remove the top and look for it there ...