Questions & Answers for: jenn air gas cooktop ignitor

Jenn-Air Gas Cooktop Model CVGX2423 All ignitors on my Jenn-Air Cooktop (model CVGX2423) continue to spark for a long period (even when only one burner is turned on). I have cleaned all of the burner ...

...gas stove top igniters keep ingniting when turned off Try carefully cleaning around the ignitors. Also clean hole in burners. Clean the holes closest to ignitors. This can be caused by a crack in ...

jenn-air CVGX2423 The ignitor won't work on one burner. It will flame with a match. Is it clicking? No...bad switch. Yes...check ignitor gap on that burner. The gap or the wiring is bad if it doesn't ...

Jenn-Air JGC8536 Gas Cooktop ignitor replacement how do I replace the ignitor myself One burner doesn't consistently light. Igniter sparks but not the same as the other - "good" burners spark at top ...

...Jenn Air cooktop and two of the five burners fail to ignite when I turn on the gas. You can hear and see the spark from the igniter working, but the spark appears to come on the backside of the ...

Jenn-Air Gas cooktop The electric ignitor is not working on any of the burners. We must light them with a match or BBQ lighter. At first the problem was sporadic. Now the ignitor just doesn't work (no

...jenn-air sce30600? I have no manual and I don't know how to start the self-cleaning cycle in cooktop oven jenn-air SCE30600. An electric cooktop uses a great deal more electrical energy than a gas ...

...Jenn-air JGC8430ADS. The rear left We have a Jenn-air JGC8430ADS. The rear left burner sparked and clicked erratically, then the switch for it quit working(wouldn't turn). We replaced the valve and ...

...Jenn air gas cooktop ignitors (all of them) do not click and spark, the model is CVGX2423B. I suspect it might be spark module fails, is that right? It sounds like you need a new spark module which ...

I have replaced the ignitor on my Jenn-Air down draft cooktop. The ignitor clicks very slowly and only ignites the gas after there is a buildup of gas. The igniter tips need to be adjusted close