Questions & Answers for: ir door sensor

...Door" warning My Canon IR 210S keeps displaying the "Close the Lower Right Door" message. I open and close but the display doesn't go away and it won't allow me to copy. Is there a sensor or switch ...

...IR 2200 This problem generates from sorter/finisher ,try detached and disconnect the sorter unit from the machine E502 Coming off of a sensor connector in an optional device is detected: ?The door ...

door the trolley will run approx. 8 - 10 inch. & stops. Have adjusted chain tension, no luck. I suspect a problem with either gears or logic board. Any ideas? Most likely is a bad IR sensor board.

...IR beam that check for objects (like a pet or child) under the door. This is a safety feature to avoid injury or death. If the sensors aren't aligned or the wire connecting either sensor is ...

...door from closing Swapping the sensors is only a temporary fix. As they get old, they get dirty lenses And/or the ir becomes weaker. The sun only adds to the problem. I suggest replacing the saftey ...

canon ir 1600 error check copier cover canon ir 1600 photo copier error check copier cover If the cover is closed, check the sensor or switch under that door. seems that the cover isnot hitting it.

...IR 3300 , have open right side door ,removed both trays ,developer ,drum , cleaned all rollers ,have found no paper jammed at all, put all back together still shows jam right side Check the ...

...IR sensor at the bottom, which is designed to prevent the door from hitting something, could need to be aimed again. On mine, the IR sending unit at the bottom was burned out. If you have the ...

IR Canon 2318 is telling me front door open mean while it is well close. 1-make sure that the door small piece of plastic is not broken. 2- clean the door sensor.

door is closing OR if the IR sensors are defective. As a first option, check to see if any object is stuck to the door (possibly low down) that is triggering the IR sensor. Hope this is helpful, if it