Questions & Answers for: Element Electronics inverter manual

the same issue with my tv. I am fairly sure that the transformer that connects the "hot" side of my inverter board the the "cold" side is shot. I have a 32" element flx3220f flat screen lcd tv. When i

my element flat panel tv has sound, but no picture. Ur LCD inverter board it dead.Replaced the LCD inverter board will get ur picture back.It a long board in shape.Tries websites ...

...need a lamp? More likely to be either the 24vdc power is not supplying the voltage to the backlight inverter board due to failure in the power supply, or the inverter has shorted out. Those are the ...

how to fix element flx-3210 that has sound but no picture? It's probably a backlight or backlight inverter issue if the problem occurs on all sources and the onscreen menus. (The backlight itself ...

Where is the inverter board located on the element flx-3210? Is it somehow combined with the powersupply? I've taken the TV apart and have found everything except a part that resembles an inverter

tv inverter has the inverter got to be replaced like for like or is there a bit of leeway as far as the part numbers go ?? Thankyou Don't know. You are in the Laptop PC category Do know; with a laptop

vivo manuals What size inverter is needed to run this size tv? It has 60 watt on the back of the tv but can't run it on 150w inverter, would a 400w inverter work? 150W inverter should match with the ...

Element tv no picture just sound already replaced inverter board. What else could be wrong Replaced the inverter board. Check voltage supplied to the back-light inverter board; from the main power ...

...up just goes bland Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the

Fix back light inverter on my 40" ELEMENT led flatscreen tv. Model ELEFW408 Black screen, no picture but have audio. Turned lights off in room and shined flashlight on screen and was able to see ...