Questions & Answers for: interior car lights randomly

Interior lights stay on I have a 2000 Ford super duty crew cab. The interior lights sometimes flash intermittently or sometimes remain on. All doors are securely closed The door switches for these ...

...interior dome light stays on, car door opened light sometimes stays on...im not sure what the problem is here?? Try disconnecting the negative battery cable for a minute or two. Then re-connect cable ...

...interior brake light comes on after engine shut down ,stays on ,drains battery in few hours if u have an electric trailer brake controller fitted try disconnecting it as sometimes the battery feed to ...

...interior lights when driving I recently had a similar problem with the "liftgate ajar" light lighting randomly on my 2001 PT Cruiser. It was even occurring AFTER I had disconnected the "ajar sensor" ...

Interior lights come on and will not shut off, or come on and off randomly, causing my battery to go dead overnight. could be bad door switch or a bad GEM (general electronic module) that controls the

...interior lights while driving. While driving the van, occasionally, the interior lights will blink several times on and off and the doors will all continue to randomly lock and unlock. This is now ...

...#39;t lock. i don't have the power hatch. It will inlock and pop to the secondary latch and the interior light comes on so i go and On my 2008 acadia the hatch unlocks at random if the doors ...

interior lights turn on. I unlock my car door while driving and quickly open and close it. then the lights go off, about 20 minutes later the lights come on again and unlocking my car door and closing

...interior lights come on at random, while parked and sometimes while driving. I noticed today that the alarm does not activate when this happens while it is parked and the interior lights are on. Each ...

...interior lights won't work, know what's going on? Sounds like a control module. If random crazy things are happening in the car I would start looking at the control module. When control modules begin ...