Questions & Answers for: install rear shocks

...rear suspension To install: Install or connect the following: Shock, reinforcement, and the two nuts. Tighten the mounting nuts to 15 ft. lbs. (20 Nm). Shock cover Trunk trim Shock-to-control arm ...

INSTALL IN THE REAR?? You can get a decent pair of gas charged shocks or monroe load leveler shocks (if they are available for your car) However, it's likely that the rear springs have sagged. You can

...rear shocks? if you bounce the car by putting your weight on the rear bumper with your knee you can test the rear shocks. If the car bounces more than once on the way up you need shocks. I generally ...

...install f55 rear shocks on my 2003 corvette how to install f55 magnetic selective ride rear shocks on my 2003 corvette Disconnect the wiring, unbolt the shocks, remove tie rod nut and remove tie rod ...

...Install in reverse order. Before installing the new shock push the piston completely down and allow it to return. Do this 2 to 3 times. For the rear remove the wheel support the rear end with jack ...

...Install or connect the following: Upper shock insulator, retainer and nut. Torque the nut to 55 ft. lbs. (74 Nm). Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm). Shock ...

...Nm) on 1988-91 vehicles. On 1992-96 models, tighten the stabilizer bar link to shock absorber retainers to 47 ft. lbs. (64 Nm). Install the rear seat back, vent duct and the package tray as

...rear axle and slightly lower the vehicle enough to lessen tension on the shock absorber. Remove the lower shock absorber retaining nut and washer. Disconnect the lower end of the shock absorber from ...

...Install the lower shock bolt. Tighten the bolt to 110 Nm (81 ft. Lbs.). Lower the vehicle. For complete step by step guide with diagrams click the link ...

install your lift and have the alignment checked. if it ... Do you need new shocks with rear lift blocks? 11 posts 6 Oct 2012 How much lift before longer shocks are required? 12 posts 15 Apr 2010 More