Questions & Answers for: install primer bulb

Question about Garden

1 Answer

...bulb. Remove screws, remove primer plate. Remove primer and install new one. Some have tabs on each side of the primer. Use needle nose to squeeze these together while you push up to release the

Ad

Question about Forest & Garden 125bt Backpack Blower

1 Answer

...install primer bulb on husqvarna 125b blower, which line to hook up where Hello . After you replace the primer bulb , the left tube on the primer bulb goes to the fuel filter inside the tank and the ...

Ad

Question about Forest & Garden 125bt Backpack Blower

1 Answer

...primer bulb and fuel lines. The old fuel lines were broken. I figured out which line runs to the carb from the primer bulb but where does the other one run? From the fuel tank to the carb, from the ...

Question about Lawn Mower With Toro Power Tools

1 Answer

...primer bulb out with long nose pliers. Then you insert the new rubber bulb until the outer part of the bulb face mates with the carb face. Then install the ring press both pieces into place until it ...

Question about Lawn Mower With Toro Power Tools

1 Answer

Install a line from the open port on the primer to the open port on the carburetor. Try the primer bulb again, it should pull new fuel from the carburetor if the two connections at the carburetor have

Question about WeedEater Hedge Trimmer 25cc Engine

1 Answer

...just get the primer bulb? You can get a primer bulb at any local lawnmower repair shop. These are less than 5.00 and very easy to install. the bulb primer is sold by it's self. Best of it Gary @ Fix ...

Question about WeedEater Hedge Trimmer 25cc Engine

1 Answer

...you can now install the new primer bulb. Put new primer bulb into place and with a dull punch slowly and very carefully seat the new primer bulb. This should put you back in business again. GOOD

Question about Lawn Mower With Toro Power Tools

1 Answer

...out of shape usually new primer bulbs don't come with them. If there are the two screws diagonally, than just unscrew and lift holding plate remove old primer and reverse for install... Good

Question about Gas Mini - Tiller/Edger

1 Answer

...primer bulb Not sure if you can. It is much easier if you install the right primer bulb. Those units are made to have primers to be used I believe. if there is a place for a primer it needs

primer bulb to prime gas what gives? https://www.partstree.com/models/440-e-husqvarna-chainsaw-2008-05/ The link shows components of the saw. Three fuel lines... 1. Fuel tank dip tube (fuel filter) to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...