how do I replace a drivers side front seatbelt on a ford mondeo the seat belt is badly frayed and will notpass MOT well the seatbelt in the front of a car are very strong and should be bolted in both ...
fuel filler ccap fuel filler cap light on If the cap is on and the light is still on, either it has to be manually reset somehow, or the cap's rubber seal is compromised and isn't sealing the system ...
injector seals replaced on the car and seens had injector seals replaced on the ford fiesta and seems after the car is running flat not picking up speed and the turbo is running fine and injectors are
1.4 cdti fiesta keeps blowin fuel return pipe off injectors but keeps running faulty fuel pump to much vol or to much psi
how to replace right front axle seal on 2008 ford fusion The axle will have to be removed in order to replace that seal. It's not an easy or simple task.
...engine codes read misfire on 4,5,6 cyl, with code p0171, bank 1 running lean, will changing fuel injectors fix this? or is it more in depth? You can verify injectors by, ...running at idle, unplug ...
...persists? If your compression is fine, and you know you have spark, then I would suspect the fuel injector is not functioning. This can be the injector or the harness. If it is not too hard to get ...
Bled my Clutch Slave Cylinder Wrong? I was driving down the highway and i pressed the clutch in and it went to the floor with very little pressure. I got home and i read that if there are no leaks, i ...
Question about 2008 Fusion 2.3
Where I am can't find parts for ford fusion 03 l need valve stem seals can you help ? Valve stem seals Ford fusion 2G66453 engine Something is wrong somewhere because they aren't even showing a 2003 ...
2008 Ford Fusion fuel pressure sensor location please? Where is it located Question edited for clarity. Question moved to Model Category. The fuel pressure sensor on a 2008 Ford Fusion is located on ...
Usually answered in minutes!
750 Questions
244 Questions
135 Questions
91 Questions
53 Questions