Questions & Answers for: infocus projector power light blinking

...Infocus the projector and they upgraded the software level of the machine. Jeff I have problem with NEC VT660k projector : problem : When you turn on the projector lights orange, and status lights as ...

INFOCUS Lamp replacement Just replaced lamp and unable to reset lamp clock. Followed instructions in manual and it still wont reset. The projector sounds like it is trying to "boot" up but it just ...

...Infocus 72 projector bulb failed after only 311 hours. I purchased a new bulb and after 20 minutes the projector turned off and I got the red blinking light again. I got the red blinking light after ...

infocus in76 projector had a blinking red light then started billowing smoke replace the lamp and blow the dust out of the projector with canned air. if it still won't light, replace the power supply/

Infocus X1 Projector started with 3 blinking red lights. Project started with 3 blinking red lights. Replaced bulb, reset to factory settings, but bulb lens cracked, so sent that one back and got ...

...Infocus LP500 and it won't turn on. The green power light is on, but when I push the green power button, nothing happens - only the green light keeps blinking. No fan, no picture, nothing. The ...

...infocus in34 projector. projector was turning off after about 5 min usage. Replaced lamp. Now power button just blinks - green - fans are on. no light though. what to do? The lamp is not lighting. ...

...power light. non stop! Projector will not turn on just blinks blue power light once plugged into power supply. check the lamp Please any questions, feel free to contact me have a nice ...

...failed. Try going to this web site for further troubleshooting possibilities: http://www.infocus.com/projectors/discontinued-projectors/infocus-in70-projector-series/infocus-in76-projector Good

...infocus in 116 projector. When pluged in the machine will not turn on the power light just keeps blinking a blue light I have also changed the power cord It might be a problem with the circuit that ...