...infocus in72 as a gift. none of the button respond to anything except the power button. the lamp turn on but no source comes on. i tried all the source inputs. Need help Hi there This unit should ...
...IN72, after power up the startup screen appears ("infocus the big picture screen" - red) but then nothing else happens and I no button respond anymore. On the other hand it is connected with the HMDI ...
Question about IN72 Multimedia Projector
Infocus IN72 powers up but no image, replaced the bulb but still no image... My IN72 is about a year and a half old so it's out of warenty. It powers on but no image is displayed. The projector bulb ...
infucos IN72 projector hw do i configure my InFucos IN72 projector, have a power but no menu display. only white light appear in the screen Hi Ronnel This is a common Mainboard failure on a Projector.
InFocus IN72 shuts off after 20 min. A couple of months ago the projector shut off. After waiting a couple of hours/days I can unplug and replug the projector and everything is fine. When it turns off
...IN72 Infocus DLP Projector, after plugging in the power source to a dedicated outlet and verifying that outlet was good I can not turn the projector on. As soon as the plug is inserted into the wall, ...
Question about IN72 Multimedia Projector
in72 does not power up. I think that it is a blown fuse. Where is this fuse located if there are no leds lit on the top, then it's a power supply issue. open it up and check the fuse on the power ...
Infocus IN72 what is the image from? make sure you have the right in put and that the resolution matches. try swapping cables, too. projector was working fine when i turned it off. when i turned it on
screen.. any idea? Dear Danexstrom, Download the manual form given link and go through it. This will solve your problem.. http://www.retrevo.com/support/InFocus-IN72-Projectors-manual/id/1081bh632/t/2
Question about IN72 Multimedia Projector
...Infocus IN72 P720 HelloTo reset lamp hours:Menu => Settings => ServiceIn this window; you can select Lamp reset.Press Enter or OK. Locate the two Brightness buttons on the top of the projector, ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions