Questions & Answers for: ignition switch is locked

Question about 1991 Spirit

1 Answer

...Ignition Switch itself (THE ELECTRICAL SWITCH) I think that is where you should Look. On these models, the ignition lock and ignition switch are removed as an assembly. Refer to IGNITION LOCK . ...

Ad

Question about 1996 Windstar

2 Answers

...ignition switch is the electrical part behind the lock cylinder where the key goes in. Ignition Switch Lock Cylinder Lock Cylinder Functional Removal The following procedure applies to vehicles that ...

Ad

...ignition switch lock cylinders (11582), lock cylinder keys are available for these vehicles or the lock cylinder key numbers are known and the proper key can be made. Disconnect battery ground cable ...

Question about 1992 Sable

1 Answer

ignition switch in the car rotates all the way around but it has always done that it just recently started not working to turn the car off.the key will turn but the car will still be on. what could be

...Ignition Switch Removal Disconnect battery ground cable. Remove the upper steering column shroud by removing the four or five self-tapping screws. Remove tilt steering column lock lever (if so ...

...ignition switch, not the ignition lock cylinder. they are 2 different things. Section 11-05: Steering Column Switches 1996 Taurus, Sable Workshop Manual REMOVAL AND INSTALLATION Ignition Switch ...

...ignition switch in my 94 couger Removal & InstallationDisconnect the negative battery cable. Remove the upper steering column shroud by removing the self-tapping screws. Unfasten the four bolts ...

Question about 1996 Taurus

2 Answers

...ignition switch has the detents and spring inside of it. The lock cylinder where the key goes in, just allows you to turn the cylinder which then turns the ingnition switch. The ign switch has the ...

Question about 2002 Monte Carlo

0 Answer

ignition switch removal how do you remove the last 2 yellow wires from switch here is the procedure can't remove the wires until you remove the key tumbler. 1. Disconnect the battery ground cable. 2. ...

ignition switch on a ford thunderbird?. Removal & Installation Disconnect the negative battery cable. Remove the upper steering column shroud by removing the self-tapping screws. Unfasten the four

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...