Question about 1997 Grand Voyager
...ignition switch, not to be confused with the ignition lock, that is the part the key goes into, and actuates the switch, if it is loose or damaged replace the lock cylinder and the electrical
...ignition lock cylinder into the LOCK position. Tape the ignition switch rod to the steering column to prevent the rod from falling out of the lock cylinder assembly. Remove the screws attaching the ...
...ignition lock cylinder and/or replacing the ignition lock housing and switch assembly. SYMPTOM/CONDITION: 1. Cannot turn the ignition key when attempting to start vehicle, this condition may be ...
...seems to be disengaged from ignition switch.lock cylinder turns back and forth with key.no spring back.radio works .battery good.cannot start car replace the entire lock ring and ignition ...
ignition turns all away around Sounds like the ignition lock cylinder is broke or the ignition switch. It has to be one or the other. Have you taken anything apart the check? Let me know.
...first it should be 49 psi.Also if you have another ignition key try using it awhile and see if the problem still exist.The ignition key lock cylinder could be worn out causing this
Question about 1997 Grand Voyager
...ignition lock cylinders tend to break off on those vehicles (Caravan / Voyager / Town and Country) and cause the symptoms you are describing. You will most likely not have to replace ...
Question about 1997 Grand Voyager
...ignition wont lock in place,just redo it but this time you need to realize that you install the key cylinder with the key in the ON postion,straight into the lock cylinder housing,aligning the ...
Usually answered in minutes!
602 Questions
526 Questions
373 Questions
335 Questions
133 Questions