Questions & Answers for: Cadillac Seville ignition lock cylinder

...ignition cylinder in a 1991 cadillac seville? the car said wait three minutes then start again. It will not start is there away I that I can repair it myself the dealer wants $600. Get a new cylinder ...

Ad

to allow the car to start or how can i fix it Yes you can bypass it or replace the ignition lock cylinder. The contacts are bad in the cylinder. Let me know if you want me to tell you how to bypass it

Ad

...start the car change the ignition switch Change the ing.lock cylinder. The tiny wires have broken that will activate the anti-theft system on the lock cylinder. You will also have to get a new key

Question about 1990 SeVille

2 Answers

...ignition? I've got an even cheaper and easier solution, instead of buying a new cylinder, find that plug and snip the orange wires going to the old cylinder.Then remove the resistor chip from the key ...

...ignition lock cylinder has a set of contacts that "reads" the resistance in the chip thats in the key. The lock cylinder has a very small wire that commonly breaks causing your same problem. The fix ...

Question about 1990 SeVille

1 Answer

...ignition lock cylinder The wires that are attached to the lock cylinder are probably broke therefore the resistor value of the key pelet is not getting to the theft system module there fore without ...

...ignition lock cylinder. the ignition lock cylinder has two wires coming off it, after tine they will break. to repair need to replace the lock cylinder code the new lock cylinder and replace the ...

Question about 1999 Seville

1 Answer

...ignition lock cylinder by putting the key in the ignition anb follow the two small white wires coming out of the bottom of the steering coloum disconnect them from the connector and use an ohmeter if ...

...lock cylinder and ignition switch, the rod to the ignition switch was disconnected from whatever it was supposed to be connected to. There should be some YouTube videos on GM lock and switch ...

Question about 1998 Seville

1 Answer

...ignition switch lock cylinder. You must first read the resistance of the key to order this part. It is the little wire embedded in the black plastic near the shank of the key, you need a Digital ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...