Questions & Answers for: Chevrolet Cavalier ignition

1991 cavalier 3.1 RS ignition starts in on position radio and wipers on and off ? Ignition switch/key tumbler are possessed. Starts in on postion, radio and wipers work or not (by wiggling ignition ...

Ad

Question about 2002 Cavalier Coupe

1 Answer

...steering coluim in a 2002 chevy cavalier and the car won't start how do i get the theftlock code Ignition keys relearn takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, ...

Ad

when i put the key in my ignition it does not want to turn I have sprayed wd 40 and try wiggling the steering wheel as i turn the key. I have to perform this step many times before i get it to turn ...

Question about 1997 Cavalier

1 Answer

do i have to remove the steering wheel to change the ignition switch on a 2002 cavalier Ignition switch located half way down steering column. Ignition tumbler (Where you insert the key) Need to ...

Question about 1998 Cavalier

1 Answer

where is ignition control module Hello, If your engine is a 2.2, then ignition module is mounted on the drivers side of head, just under the ignition coils. if you have a 2.4 engine, then ignition ...

...cavalier it has gas and oil but wont start it has gas and oil no spark check see if power going to ignition coil primary terminal, if not check ignition coil fuse.if power going to

Question about 1998 Cavalier

1 Answer

...got fuel but no spark how to check this out? motor spins over but it will not start. check ignition coil see if its getting battery power check black and pink ignition wire going to

Question about 2004 Cavalier

1 Answer

where is the ignition swith trying to locate ignition swith Here's the ignition switch. Repair Guides Instruments Switches Ignition Switch AutoZone com

Question about 2001 Cavalier

1 Answer

No spark on cyl 3 and 4 Have replaced spark plugs,3 4 coil,ignition module. Swaped 1and 4 injectors.have done compression check.all cyl have 225 lbs comp. Possible cam sensor or pcm??? What engine ? 2

...key switch no good Did you try relearn ? 30 Minute Learn Procedure Tools Required None Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON. The vehicle ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...