Questions & Answers for: Jeep no ign

Question about 1996 Grand Cherokee

1 Answer

...the fuse, switch motor; the gauges all turn off when the brakes are pushes - check that the gauges IGN B+12 is not intermittent (loose connector from IGN switch); the gauges turn off then back on ...

Ad

Question about 1994 Grand Cherokee

1 Answer

c heck eng lite check eng lite on with ign off & off with ign on, will not start well the only thing i know that happened to it was it ran hot (really hot) enough to lock up the engine .I replaced the

Ad

Question about 1999 Grand Cherokee

1 Answer

...once it leaves the distributor. Please help, I would like to get home tonight. 99grand cherokee ign. system has no dist. its coils,unless its a99 with 98 ign......! you should have afault ...

Question about 1988 Cherokee

1 Answer

1988 cherokee no power to coil turns over fine but will not fire...changed coil..pickup coil...ign sw... coil and plug wires etc...no power to coil?...crank sensor? ign module?computer? is there an ...

Question about 2000 Grand Cherokee

1 Answer

2000 Jeep Grand cherokee Laredo wont start. Engine turn over . No noise from fuel pump with ignition on. Replaced fuel pump and filter.Turn ignition on- pump did not run.Jumped the fuel pump at the ...

when you start jeep it dies when key is released Could be the ignition switch, or the running ignition ,if it has ign 1 and ign 2,out of the ignition module! Or if it has a ballast resister in the ...

98jeep grand cherokee, no power @ ign. on, acc., start, etc. no dash lights, replaced ign. switch, checked all fuses, relays, any ideas??? have you checked it out with a multimeter for 12v power to ...

...Unplug all your injectors then replace fuse if the fuse is still good after you turn on the ign (don't try and start the car) Then shut the ign off and plug in one injector at a time checking ...

...like I get no fire engine will die out while driving sometimes will restart I have replaced the Ignition coil mod. any ideas as to what may cause shut down? have added new alt., ign module, and ...

2002 Jeep wrangler x. Hi my turn signals don't work. Nothing on dash, no lights. Also no hazards. I replaced the turn signal multi function part in the steering column, and the relay that was in there

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...