Questions & Answers for: ig31c m7s

on first power up, no video, no sound. Am building a new system with Biostar GF7110p-m7s, Intel Pentium Dual core E2200 2.2Ghz, cpu, 2 Crucial 2048 MB PC5400 DDR2 800 Mhz memory, Seagate 160GB SATA ...

connect cd drive to biostar gf7100p-m7s i bought a biostar gf7100-m7s and i cant figure out how to plug in my cd drive it has a 34 pin cable but my drive has a 40 pin. do i need a special ribbon cable

sound doesn't work on biostar gf7100p-m7s I have a new build with a biostar gf7100p-m7s and I can't get the sound to work. I have installed a new sound card; still no sound--except with a usb sound ...

I have a Nvidia gforce 7100 that will not display thru s-video I was reconfiguring the video card and now can no longer see the screen. I have tried to reset the video, everything appears on the ...

biostar gf7100 mp - wont boot with ext usb drive attached Have tried to change bios boot options but whatever sequence I define the machine wont boot with the external usb hard disk turned on. Just ...

Biostar gf7100p-m7 does not boot. flashing red light 8 times - does not boot. flashing red light 8 times, pause, 8 more flashes. No display on screen Intermittent problem with booting beforehand, now ...

One long continous beep on power up Change your Ram then solve your problem.

No posting on start up No post alert given at start up. Computer fails to boot up. No response or screen. check power supply

IG31C-M7S_080425 for instructions. Alternativly to save you some time, the Cmos reset jumper is located between the SATA-1 socket and the J-Panel connector on the motherboard. Hope this helps you out.

When try to make the M/B on it just run the cpu fan and power drops instantly ? Hi, That means the PSU( Power Supply Unit ) is not giving enough power. Check the wattage of your PSU, it should be 500 ...