Questions & Answers for: idle speed

how do i reset idle? Technically the idle speed is not adjustable.  The computer controls idle speed with the idle speed control motor.Base idle is around 500 RPM with normal idle in park at 800

Ad

Question about Partner Gas Powered Cut Off Saw K960 16"

1 Answer

...idle speed screw. There may also be a high-speed mix screw. Try turning the idle speed screw in 1/4-turn at a time until it idles. If you turn it too far, the clutch will always be engaged so the ...

Ad

Question about Partner Gas Powered Cut Off Saw K960 16"

1 Answer

...idle speed drop a little. Back it out 1/4 turn and leave it alone. If the first 1/4 turn drops the idle speed, turn it OUT 1/4 turn and see if the idle speed rises more. When you get idle speed that ...

Question about Partner Gas Powered Cut Off Saw K960 16"

1 Answer

...idle speed, righty fasty, lefty slowy idle mixture, adjust in to get fastest idle speed. Once you go to far and the engine starts trying to stall , back it back a little to fastest/smoothest idle. ...

Question about 2005 Colorado

1 Answer

idle speed, the PCM commands the throttle closed reducing air flow into the engine and the idle speed decreases. In order to increase idle speed, the PCM commands the throttle plate open allowing more

idle speed at 160,000 mi, how is it done 2003 Honda CRV I do not have service manual. Therer are no issues with the crv. the maintenance schedule for 160,000 miles says to "inspect idle speed" nothing

the idle mixture screws first and then adjust the idle speed screw to compensate adjusting the idle mixture screws will alter the idle speed but when properly adjusted then adjust the idle speed screw

IDLE SPEED ADJUSTMENT ON A 1985 MERCURY GRAND MARQUIS COLD IDLE SPEED IS VERY FAST AND WARM IDLE SPEED IS SLIGHTLY FAST COLD IDLE SPEED IS VERY FAST Do you have any codes? Did you change an air filter

...idle speed on ford ranger 3.0 There is a base idle speed set at the factory . From sensor inputs the PCM - engine computer controls idle speed in all conditions . There is nothing for you to change ...

Question about 1985 Grand Marquis

1 Answer

...idle speed and it is not adjustable at all. However, if it IS idling too fast then this means that the engine control computer has reached the limit of what it can do and the still too high of idle ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...