Questions & Answers for: ics 60

60"projection TV The top right side and bottom left side of my TV are discolored. Is this something I can try and fix myself? Convergence ic's are about to go! Look for loose connection on board first

...what do i do? Have convergence IC's changed in your 60" TV. I only use ORIGINAL IC's, not generics or knock offs. Most companies that fix have no idea what the difference

Location of IC's What are ic's and where are they located on the 60 inch Phillips projection tv if you do not know what IC is i do not think you should be in a high voltage TV. IC is integrated ...

PHILIPS 60' HDTV SCREEN MULTI COLOR NOT CORRECT. RED AND BLUE/GREEN SHOEING SEPERATE Convergence IC's bad = replace both STK392-110 or 120 with upgrade Stk394-160 Hitachi part # CZ 01341........ DO ...

...60 inch philips magnavox that I cannot adjust the color or the convergence from the front panel it goes back to the same bad color and is out of convegence You need to replace both convergence ICs ...

...60 inch projection tv that wont let you adjust the red convergence up so it projects a double image on the screen is it a convergence problem any ideas on the cause Yes its the convergence ICs. You ...

...60" model ptv835 Ireplaced the chip HCNW136 for the picture shrinking and expanding offered on Magnavox help.com. The day before I replaced the chip the picture started having an upward bow at the ...

...60" Philips I bought in August 2005. I called Circuit City and they said it was a problem with the convergence and the TV is probably shot. $2000 for three years LUCKY ME STKs cost no more then 19.00 ...

philips magnavox 60" rear projection no sound no picture That could be from 1) Faulty Lamp 2) Vertical/Horizontal Output IC 3) A Shorted IC driver 4) Blown fuse 5) Open resistors around the fuse Keep ...

Our P60921 60 inch RCA has 2 distinct colors(gren, blue, red) images...the color convergence -we are shown on the manual that we can adjust them, but when we go to set up, there is no option for ...