Questions & Answers for: ice cube maker sensor down

Question about Gold Series GI15NDXT 15" Automatic Ice Maker with 25 Lbs. Storage Capacity, 50 Lbs Daily P...

2 Answers

...ICE MAKER THERE ID A SCREW TO ADJUST THE SIZE OF THE ICE CUBES TURN IT DOWN AND YOU WILL GET SMALLER ICE CUBES ALSO SOME MODELS HAVE A OUTSIDE KNOB TO ADJUST SIZE,LET ME KNOW-MIKE check to see if the ...

Ad

Question about Gold Series GI15NDXT 15" Automatic Ice Maker with 25 Lbs. Storage Capacity, 50 Lbs Daily P...

6 Answers

Ice maker I just replaced the rear mount ice maker kit and it is making three half ice cubes. Can I increase the amount of water, so it will make more ice? Thank you. When an ice maker is producing ...

Ad

Question about RS2534 Side by Side Refrigerator

1 Answer

...ice cube mold closest to the door. This is where the foam piece goes in. The slot where this piece goes has some raised lines sticking out on each side-- I wouldn't call them brackets and the foam ...

Question about Ice Maker CM3 30inW Cubed Ice Machine 900LB

1 Answer

...in the very back right and left hand side where the ice drops into the bin. Take some ice machine cleaner and wipe down the eyes. You should be able to pull the holders out to get to them

Question about Ice Maker CM3 30inW Cubed Ice Machine 900LB

1 Answer

...cube size control when the ice machine is in the harvest cycle, or in the first 10 minutes of the freeze cycle. 1. Open the door and remove the control box cover. 2. Locate the cube size adjustment ...

Question about Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker

1 Answer

...ice maker should be down until the ice bin fills up, but the arm on my fridge seems to be stuck up in the ice maker. How can I resolve this? you are right the arm must be in the down pos to work ...

ice falls down into the bin to the right and left side there is where the bin sensors are you have to pull them sideways you can also open the control panel and look where the bin sensor wire runs and

Question about Cubelet Ice MakerDispenser Water Cooled LED Sensor Operation

1 Answer

...up but no ice cubes forming and dropping in bin Replace water float and check water inlet valve. with water constantly filling sump tray it will not make ice water will never cool down to 32

Question about Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker

1 Answer

ice maker The ice maker is producing ice cubes with not automatikly stopping Many icemakers use a bar or a sensor to shut off water when ice levels are at a maximum. Check to see if it's bent, missing

Question about Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker

2 Answers

ice maker I emptied the tray of old ice, reset the arm (down)...will not make ice cubes in the bin. Door ice is ok. I empty the old ice from time to time and never have a problem. Either the ice maker

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Refrigerators Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...