Questions & Answers for: hyundai santa fe headlight working

...santa fe 2002 Headlights won't turn on headlight will not turn on, but if i hold the high been lever, they work. what gives, Thank you.. john head light switch or body control module ,, BLOWN FUSE ON ...

...Santa Fe Both headlights are out. Fuses are fine. Fog and Bright lights all work. sounds like a fusible link in a harness under the hood. hard to find , i wuold take to an auto/elec specialist Good ...

...Hyundai Santa Fe. Low beam lights not working. Hi beams and running lights OK. Headlight low beams blow simultaneously sometimes. Actually quite often, for some reason. Check for voltage with a 12v ...

...santa fe because low beam wasn`t working put a new one and the same think happen only high beams working most likely a fuse problem did you ever get this problem fixed? I have the same thing going on ...

...Hyundai Santa Fe appear to be very cloudy. My lights at night arent as bright as they should be. How do I clean & with what? Or do I just need new lights? I have tryed to use everything on the ...

...Hyundai Santa Fe headlights Passenger side headlight won't work .I put in new bulbs ... lamp comes on partially. I actually plugged in the bulb from the back side to confirm. The old bulb ...

...Santa Fe. When I click on the brights, the headlights go out and the gauges stop working. There's a buzzing noise, the windows don't work, the only thing working is the emergency flash 2006 ...

...Santa Fe headlight relay Lo-beams work, Hi-beams intermittent. Will be working and then go out while driving... then come back on. Not fun at 65 mph. Can't find the h/l relay. The cover on the fuse ...

...hyundai Santa fe and when I turn headlights on the insturment panel don't light up so I can't see how fast I'm going..the cover to the fuses is missing so I don't know what fuse The dash lights work ...

...Hyundai Santa Fe (131 model) and the main beams are not working only the LED strip light works and the fog lights. I have changed bulbs and checked the fuse. Any other ideas please? Try changing the ...