Questions & Answers for: Nissan Pathfinder hyt cam

Question about 1995 Pathfinder

2 Answers

belts 95 nissan pathfinder serpentine belt diagram Timing belt has marks on it that refer to the cam marks and the crank gear. Looking at the engine from the front, the timing belt should drape over ...

Ad

Question about 1997 Pathfinder

1 Answer

1997 nissan pathfinder timing off. I replaced water pump(behind timing belt). Timing "gears" got moved (two top ones). I don't know how to make sure everything is lined back up correctly.Any ideas? ...

Ad

I'm not sure how to get the timing belt sprockets aligned on their indexes, and at the same time be TDC on the first firing piston. Please help korby FIRST GET NO. ONE PISTON AT TOP DEAD CENTER USING ...

Question about 1998 Pathfinder

1 Answer

Left cam shaft is 1 tooth off I have had my 98 Pathfinder since it had 30,000 miles. I need to change the water pump and notice that after lining up the timing marks, the left cam shaft is 1 tooth off

I need a diagram of timing chain replacement Thank You During most engine rebuilds, a completely new timing assembly should be installed. If wear exists on any component, replacement of the entire ...

Question about 1996 Pathfinder

1 Answer

diagram of cam sensor location The cam sensor for these engines is the hall effect in the distributor. Now days, you may have to purchase the whole distributor. Let me know if you need anything else.

Question about 1994 Pathfinder

1 Answer

how much of the front of the engine has to come apart to change the water pump 1994 pathfinder everything. pump is located behind the timing cover. you will need to take off the timing belt to replace

Question about 1994 Pathfinder

1 Answer

cam bearings right head 1994 pathfinder the cam has froze up. distroyed the timing belt at the 6 O'clock position Therefore I believe the cam bearing/s had to have seized up. can I change the bearings

Question about 1994 Pathfinder

1 Answer

right head cam seized up is it possible to change the cam bearings after removing the valve cover to fix the problem?? overhead cam heads do not usually have cam bearings. If your cam has seized, it ...

Question about 1994 Pathfinder

1 Answer

2003 V6 pathfinder cam sensor location where on the engine is it located? Hi its at the top, but inside the covers of cam shaft pulley. timing belt usually sit on cam shaft at the top side of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...