Questions & Answers for: Harley Davidson hyt cam

cam assembly 2001 xl1200 custom need to reinstall 4 cams I don't understand what you are wanting to know. You said "reinstall 4 cams". If you've taken the cams out of a Sportster, you need a book. ...

cam belt replacement schedule how oten do i need to replace the cam belt for a 2004 ultra classic harley Cam Chain, Have your dealer inspect it at 30k unless you hear that area being louder than ...

reinstalling oil pump and cams on a 2003 Harley Davidson FLSTC what is the proper alignment for timing gears on a 2003 Harley Davidson FLSTC Absolutely!!! Have you replaced the stock cams with gear ...

1989 Harley Sportser. Ok I just replaced the gaskets in the bottom and top end and side casings, I put all intake and exhaust gears on mark as described in manual, Test fired it and its spitting fuel ...

how do you set camshafts on an 1986 harley davidson 883 you have to install cams #1, #3, and #4 first. Time cam #3 and #4 with each other. The final cam to install is #2 and the marks must line up ...

what cam would be good to put in a 2004 88. I am replacing the cam tentioners with the hyd unit and wanting to put a hotter cam without doing anything to the top end. There are plenty of cams out ...

i accidently removed one of my camshafts from my 06 1200..where are the marks supposed to line up? each cam should have a number on it 1,2,3 and 4,and then a letter which indicates year,not sure but ...

thinking of putting different cam in my 98 flhtcui 1338 ev 27 was what i think is that good one some one said a andrews mid range one as well is that the samething The Andrews EV-27 is a good cam for ...

want to replace the stock cams on my 2008 harley davivison ultra classic and install the up graded 255 cams. no problem with bike just want to pul stock cams out and replace with the 255 cams Hi ...

aligning crankshaft marks Camshaft timing procedure for 1982 harley davidson xlh 1000 cc On the pinion gear there is a timing mark. This mark will line up with the rear cylinder intake cam. There are ...