Husqvarna 2000 sewing machine foot pedal stuck on but not pressed sewing, when suddenly the machine takes off fullpower and unable to stop! you may need to take foot pedal apart and clean it the ...
...suddenly stopped,#345, motor runs. can't turn it by hand Sounds like you have had a kick back and the chainbrake has activated, with the engine stopped, grab the front hand guard and pull it fully ...
Question about "Chain Saw - 16" Bar, 3 Hp
...Husqvarna YTH1542xp with a twin Kawasaki engine suddenly stopped. Will not start again, had blown 20 amp fuse, replaced fuse and starter engages, but engine won't turn over. After several tries ...
Question about "Chain Saw - 16" Bar, 3 Hp
...husqvarna lgt2545 tractor with no problem. Turned tractor off for 5 minutes. Started up, would not go forward or in reverse. What could be the cause less than 230 hrs For drive to suddenly stop, I ...
husqvarna Foot pedal problems? For some reason, my foot pedal suddenly stopped working, and my machine won't run. Is this an easy fix? Thanks check your plug or the wiring to the peddle it could be ...
Question about Chain Saw Models 51, 55
...husqvarna and while the motor turn he stop suddenly often of the time when I put the brake and the motor is truning slowly he stop Check to make sure the brake binder is not engaged...which is the ...
suddenly stopped working. I had removed the wheels and deck in order to mount my snow blade. Cranked and suddenly no movement and the brakes stopped working. You probably kost one of the key stock out
Question about Chain Saw Models 51, 55
Why did my Husqvarna Zero Turn just stop going forward or backwards all of a sudden? The drive belt is still on. Could be bad clutch, or the transmission shift linkage has come apart or bent.
Question about Chain Saw Models 51, 55
husqvarna rose is sewing without me! I am doing something and suddenly it starts sewing straight and does not stop till i turn the power off You probably need to have that checked. Until then, be sure
Question about Chain Saw Models 51, 55
husqvarna zero turn 54 inch will not go forward or backwards. Mowed went to put up and just stopped. Hydro units usually do not suddenly stop. Check your drive belt on the Hydros. When a Z mower stops
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
