Questions & Answers for: husqvarna sewing machine dogs lower

...Sewing Machine Model 6360 Feed Dogs do not go "up & Down" when sewing. Took of throat plate and lower housing -cleaned everything. The feed dog "lower button" takes it down but when releasing it, I ...

Ad

Question about Viking 1

1 Answer

Husqvarna Viking 940 using switch to lower feed dog to remove stitch plate it worked. But after cleaning and replacing stitch plate the feed dog switch doesn't raise the feed dog to enable material to

Ad

...sewing machine I have a viking emerald 183 sewing machine. I would like to know the settings to use a stippling foot! Do I use the dial for the pressure foot or the switch in the back to lower the ...

...Husqvarna viking 230 sewing machine. I've set the stitch length knob to the "drop feed dog" sign, it clicks, but the feed dog is not lowered. When I start the machine, it sews backwards. Please help ...

...Husqvarna quilt designer and I can not find my manual I think the Quilt Des. is the same as the Designer 1 (which is what I have) and the lower feed dogs is a serrated dial (looks like part of a ...

Question about Designer I

1 Answer

...Husqvarna 2000 sewing machine please? It's been a while since I have owned a series 2000 Husqvarna, but from memory there is a little white (?) button on the lower right-hand side - near the knob for ...

Question about Viking 1

1 Answer

Feed Dogs do not feed the fabric to sew or embroidery You have probably inadvertantly lowered the feed dogs. Find the lever for this machine and turn it to re engage the feed dogs....

Thanks! There is a switch on machine to raise feed dogs up/down. Remove any extension table to locate it because many of these options are located in the back of machine & hidden by table! Jimmy :

Question about Viking 1

1 Answer

...dogs is hidden on front of the machine behind the accessory tray, if you pull the accessory tray off, you will see the dial on the bottom edge of the machine, under and to the right of the bobbin ...

My Husqvarna Emerald 183 feed feet won't raise back up after being lowered for sewing on buttons Have you tried stitching? Feed dogs usually will not rise until the machine actually stitches.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...