Questions & Answers for: husqvarna chainsaw pull rope stops

How to replace pull rope in Husqvarna 136 chainsaw. Use this as a guide and it is pretty simple R² Starter Rope by SmallEng.com http://www.youtube.com/watch?v=eRyy3MlsjVo HTH Lou

...pull start, and have a socket on the nut on the opposite end of the crank shaft. But the clutch assembly refuses to break loose. Going "clock wise". an old way to stop the piston is to take the spark ...

the rope will not pull out at all to start the saw Go to Husqvarna Genuine Parts - Reliable Spare Parts for Homeowners

CHAINSAW. WHEN I PULL THE ROPE IT TURNS WITH GREAT DIFFICULTY. WHEN I REMOVE THE SPARK PLUG IT TURNS WITH EASE. THIS SEEMS TO BE A COMPRESSION RELEASE PROBLEM. WHAT CAN I DO?? ED SABIR A Husky 445 has

...Husqvarna 338. I'm having difficulty re-installing the pull rope. Is there a trick to it or a special tool. There are no special tools required,with the pulley still connected its just a matter off ...

starter rope grabs at times. why? While pulling starter rope it sometimes grabs and then lets go. Removing spark plug allows rope to work fine. Any ideas? try using the de-compression button when ...

...pull rope on my 5hp MTD Chipper? pull the starter cover pull rope out to length lock the housing the rope is in, in place with a tool pull out rope. reinsert new rope into retaining hoe tie a not and ...

only pulls out about an inch, then is locked Better take the cutting blade off and see if u can turn the motor over by hand. It may be seized. Or take the pull starter off to see if the rope is fouled

replaced the starter cord on a Husqvarna 55 rancher chainsaw and when I reassemble the starter won't turn. Any ideas? Is it possible that the crank shaft seized first and caused the pull rope to break

...Husqvarna chainsaw is having an issue when I pull the rope to start it. pull rope moves smoothly when off. when together, only pulls out about a foot. fells bound up. gas and oil new. thoughts 1) ...