Questions & Answers for: husqvarna chainsaw idling

husqvarna 345 wont idle, let off the throttle and it dies promptly it sounds like you need to adjust your idle screw. you should be able to turn it clockwise 1/2 to 1 full turn to make it idle ...

Husqvarna chainsaw. what are the factory settings on a Husqvarna 51 chainsaw?Had chainsaw running and started messing with carb. setting now it wont run. Most chainsaws and small engines are 1.5 turns

Husqvarna 385 I have a husqvarna 385 saw. It starts good, idles good, but as soon as you rev the saw it starts to cut out and runs very rough. but returns to a perfect idle. Sounds like dirty ...

...husqvarna 340 chainsaw and it will not idle I need to adjust the carberator screws but I do not know how Turn the screw labled T in a little. This will raise the idle setting. Heres a link to the ...

want start i have a husqvarna 455 , only 4 months old was running great until i cleaned out the air filter now it want start. ive put a new spark plug it and put gas directly in tge carb still nothing

...fuel Husqvarna 350 chainsaw will not start and run, getting fuel and spark check set screws on the side of carb turn the all the way in the turn out till idles or check the screen in the ...

Husqvarna 350 chainsaw. Why does the chain continue to turn at idle? I just installed a new clutch. Adjusting the idle down causes the saw to shut off upon trying to accelerate. Sounds like the clutch

Husqvarna 51 idle seems to struggle, runs OK when I throttle then chokes and dies out as soon as the throttle is released. What can I do? will it start right back up after it dies? you could use a ...

husqvarna 55 idles but stalls with gas chainsaw will idle but stalls when increasing gas Most likely the diaphram in the carburator is bad.

husqvarna 61 vibrates badly when idling.Various things keep coming loose. Tried locktight. 2nd problem is slow to idle from full revs, sometimes won't idle, will cut out when turned chain side down. ...