Questions & Answers for: husqvarna chainsaw coil

...husqvarna 61 chainsaw. It has no spark from the coil. Before i replace the coil could it be another problem that is causing this. use sand paper and clean the metal part on the coil also the aluminum ...

...Husqvarna Chainsaw 61 has no spark it has new spark plug'' Remove cover & unplug shutoff wir from coil and replace cover & check for spark,if you have spark repair shorted wire or switch.If no spark ...

husqvarna 55 ignition coil hello the wire from coil to stop switch is grounded and the chainsaw will not start, is the coil bad and in need of replacement first thing you need to do is check the wire ...

...husqvarna 41 air injection chainsaw made in 1997 Here you go. If the price seems high there are likely several more to be found on this page. Good luck with it. ...

...Husqvarna 394xp chainsaw Husqarvna Chainsaw. I need a coil ignition module for 394xp complete with spark plug connection I found an IPL for your saw here: HusqvarnaUSA.com ...

husqvarna 14" chainsaw wont start. put new plug husqvarna 14" chainsaw wont start. put new plug on plug wire and pulled cord, no fire. what would cause it not to fire? Try a new spark plug.If ...

husqvarna 240 chainsaw i have tried disconecting the kill switch and fiting a new spark plug but still no spark could it be the coil pack and lead or magnets in the fly wheel , where is the best place

...husqvarna 240 chainsaw Use an air gap tool. Clean the area where the coil mounts on the engine with emory cloth to make sure you get a good ground. install the coil and lightly tighten screws (just ...

husqvarna 65 cutsout cuts two blocks it starts fine cuts for copel minutes then it stopes and wont start til coled down check tank vent and the coil,to see if vent is plugged,and the coil gets hot

Does anyone have a diagram of coil wire hookup on Husqvarna 350 chainsaw? cannot find where to hook one of the wires Images for coil wire hookup on Husqvarna 350 chainsaw?